US-52 220V speed control panel 400W

 
14.00
(17.36 inc tax)
18.18.0009
Out of stock

US-52 220V speed control panel 400W

Feature:

· The speed control range of governor is 90-1400r/min and 90-1700r/min respectively at 50/60Hz.

· The controller is manufactured with high quality electronic components, and its performance is stable and reliable.

· The control accuracy is high and the micro-control of speed is realized.

· The operation of the product is simple, which enables novices to learn and master the operation method quickly.

· Widely used in packaging, printing, food, electronics, instrumentation, medical equipment, clothing industry production line as speed drive device.


Specification:
Product model: US-52
Matching power: 300W; 400W; 500W (Optional)
Working power supply: AC220V 50/60HZ (Voltage fluctuation range ±10% Ue)
Use environment: -10~+50℃
Relative humidity: <90%
Speed range: 90-1400r/min 50HZ, 90-1700r/min 60HZ

Package list:
1 * Speed Controller

Note:
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.

Installation and usage method:

· The controller has 6 lines, the black line is the main line of the , the red and white are the capacitor secondary lines, the two blue lines are the speed feedback line, and the green line is the ground line.

· Turn off the power, connect according to the wiring diagram and confirm that the line connection is correct, do not arbitrarily modify it;

· Set the external speed knob to "0" before use to avoid transient high currents and damage the controller.

· This product is controlled by generator feedback voltage, and the control line is divided into two lines: "blue" and "yellow".

· When the governor is connected to the and found that the torque or speed does not meet the requirements, the US-52 adjusts the side trimmer potentiometer (speed setting adjustment).

· To change the direction of operation, simply replace the jumper "CCW" and "CW" on the wiring on the back of the controller.

* When changing direction, you must change the after it has completely stopped running.
1) Select COM and CW short circuit, then the rotates clockwise;
2) Select COM and CCW to short, then the rotates counterclockwise.

· The action switch only controls the to operate or stop, and does not use the power supply for interruption. If it is not used for a long time, please turn off the power.