Specification:
Dimension | 130mm×100mm×50mm (L*W*H) |
Input | AC110-220V±10% 50/60Hz |
Spindle Motor | 500w |
Spindle Speed | 3000-12000r/min |
Motor Diameter | 52mm |
Motor Length | 208mm |
Operating Voltage (Output Voltage) | 100V DC |
Current | 6A |
Speed | Up to idle up to 15,000 rev / min |
Torque | 5000G/CM |
Insulation Resistance | > 2 megohms |
Dielectric Strength | 400V |
High precision spindle runout 0.01-0.03 |
Style: ER11Chuck size:
- Chuck Size: 1/8"
- Material: High Grade 45 Carbon Steel
- Total height: 18mm
- Outer diameter(Max.): 11.5mm
- Gripping Range: 3mm
- Small diameter: 7.8mm
- Fits metric shank size(s): 3mm metric shank
Nut Size:
- Inner Diameter: 8.7mm
- Height: 13mm
- Hex Diameter: 17mm
- Outer Diameter:19mm
Package Included:
- 1 x 500W Spindle Motor
- 1 x Power Supply
- 1 x 52MM Mount Bracket
- 1 X ER11 Collect
- 4 x Screws
Note:
the wire + and - could be connected in both position as you want but make sure the output and input voltage position to be correct.
No reviews found